Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set Up Lane Assist and Adaptive Cruise Control on the Skoda Kamiq

Model: Skoda Kamiq MK 1 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Onboard computer

Video tutorial

In this video, you will learn how to set up the lane assist and adaptive cruise control on a Skoda Kamiq. This vehicle features a digital display.

Go to the switch panel on the right side of the steering wheel, on the button closest to the centre. This will give you access to the lane assist, which helps maintain lane position and can be toggled on or off. The front assist provides braking assistance: the vehicle detects an obstacle ahead and brakes automatically.

On the left side of the steering wheel, there is a lever that controls the adaptive cruise control: activate it by lifting the lever, and the momentary switch gives you the distance from the vehicle in front, allowing you to choose a short, medium, or long distance.

It operates from 18 to 100 mph.


Updated on 7 October 2026 by ScegliAuto


Related tutorials

How to Activate the Cruise Control on a Škoda Kamiq
How to Activate the Cruise Control on a Škoda Kamiq
Skoda Kamiq (2018-2026 / MK 1) To activate the cruise control on a Škoda Kamiq, start the engine and reach the desired cruising speed. Once this speed is achieved, press the SET bu…
How to replace the cabin air filter of the Skoda Kamiq
How to replace the cabin air filter of the Skoda Kamiq
Skoda Kamiq (2018-2026 / MK 1) If the time has come to replace the cabin air filter of your Skoda Kamiq and you want to do it yourself, then all you have to do is follow the proced…
Where to Find the OBD Port on a 2020 Skoda Kamiq
Skoda Kamiq (2018-2026 / MK 1) Before connecting any diagnostic tool to your 2020 Skoda Kamiq, you need to know the exact location of the OBD port. In this guide, you will find it …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos