Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Activate the Cruise Control on a Škoda Kamiq

Model: Skoda Kamiq MK 1 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Checks and maintenance

Video tutorial

To activate the cruise control on a Škoda Kamiq, start the engine and reach the desired cruising speed. Once this speed is achieved, press the SET button located at the end of the lever on the left side of the steering wheel.

This will activate the cruise control, allowing you to increase or decrease the speed by raising or lowering the lever; additionally, thanks to the adaptive system, the speed will be automatically adjusted to maintain the correct distance from surrounding vehicles.


Posted on 3 September 2026 by ScegliAuto


Related tutorials

How to Reset the AdBlue Warning Light on a Škoda Kamiq
How to Reset the AdBlue Warning Light on a Škoda Kamiq
Skoda Kamiq (2018-2026 / MK 1) To reset the AdBlue warning light on a Škoda Kamiq, you need to top up the tank with the necessary amount of additive fluid. Start by opening the fue…
How to Replace the Key Battery in a Škoda Kamiq?
How to Replace the Key Battery in a Škoda Kamiq?
Skoda Kamiq (2018-2026 / MK 1) To replace the key battery in a Škoda Kamiq, press the button on the top of the device to lever it out of its housing. This will allow you to detach …
How to Set Up Lane Assist and Adaptive Cruise Control on the Skoda Kamiq
How to Set Up Lane Assist and Adaptive Cruise Control on the Skoda Kamiq
Skoda Kamiq (2018-2026 / MK 1) In this video, you will learn how to set up the lane assist and adaptive cruise control on a Skoda Kamiq. This vehicle features a digital display. Go…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos