|
Do it yourself
| |||
| ||||
How to remove the left door panel of the Smart Forfour.
Model: Smart Forfour
W453, MK 2
- Years 2014-2021
First of all it is necessary to remove the plastic covering that we find, inside, in correspondence with the external rearview mirror. This operation can be performed using a special plastic lever. At this point, unscrew the screws positioned respectively: on the side of the panel, in correspondence with the door lock; inside the housing of the opening handle, positioned behind it; and finally, behind the black rear-view mirror position adjuster (to be removed using the plastic lever), located near the door handle at the top. Remove the housing of the opening handle and proceed to release the clips that fit the panel in the lower part. Once this operation is finished, we can remove the panel from above and disconnect the electrical power cables of the switches and the adjustment cables of the mirror and that of the handle.
Posted on 11 March 2019 by ScegliAuto
This video is currently unavailable
Related tutorials
Smart Forfour
(2004-2006 /
W454, MK 1)
How to remove the exterior door panel on a Smart Forfour? This video explains how to proceed: before starting the disassembly work, let's disconnect …
Smart Forfour
(2014-2021 /
W453, MK 2)
Today's guide will show us the steps to disassemble and replace the speakers of the Smart Forfour. First, we open the front door and begin to disasse…
Smart Forfour
(2004-2006 /
W454, MK 1)
In order to remove the rear door panel of the Smart Forfour, you need to completely detach the plastic trim located near the side mirror: by loosenin…
Other guides you may be interested in
|
How to Replace the Window Regulator on the BMW X3
Replacing the window regulator mechanism requires removing the door panel and the aluminum underpanel to access the mechanism itself. Remove the motor and loosen the glass retaining clips to complete the removal of the window regulator. Attach the motor to the new mechanism and insert the assembled unit back into the door, securing it with the appropriate nuts. Then, insert the glass and tighten the clips, completing the installation by connecting the motor's power connector and performing a functionality check before reassembling all other components. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |