Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the spark plugs mounted on a Smart Fortwo

Model: Smart Smart 450 - Years 1998-2007
Part: Spark plugs

Do you want to remove the spark plugs mounted on a Smart Fortwo? Let's see in this video in detail how to proceed: we open the engine compartment (rear part), lift the engine cover panel. We remove the metal cover of the motor, then, unscrew the locking pins of the coils with a special socket wrench, grasp it with our hands and rotate it in a twist way, until it is extracted from the head. Unscrew the spark plugs with a socket wrench (extract them from the cylinder head) and take the new ones (insert them into the cylinder head with the socket wrench). Finally we reassemble the plastic head cover panel.

Posted on 10 February 2020 by ScegliAuto

This video is currently unavailable

Related tutorials

How to replace the spark plugs of a Smart ForTwo
How to replace the spark plugs of a Smart ForTwo
Smart (2007-2015 / 451) Before we begin, we will need to open the tailgate of our Smart ForTwo. So let's start by disassembling and removing the engine compartment cover. Af…
How do you replace the candles on the Smart Fortwo?
How do you replace the candles on the Smart Fortwo?
Smart (2007-2015 / 451) The replacement of the Smart Fortwo's spark plugs is done by opening the rear trunk and locating the engine at the back of the car. Here, it will be …
How do you remove the spark plugs of the Smart Fortwo?
How do you remove the spark plugs of the Smart Fortwo?
Smart (1998-2007 / 450) Let's see in this guide the main steps that will allow us to disassemble and replace the Smart Fortwo spark plugs. First of all we access the rear pa…

Other guides you may be interested in

How to Replace the Radio in a Ford Focus

First, engage the handbrake and put the car in a low gear to prevent it from rolling during the replacement. Next, lift the bonnet to disconnect the battery cables and protect the electronic components. Unscrew the two screws located under the front panel of the stereo. Use a plastic lever to lift the bottom of the stereo. Disconnect the connector at the bottom and also remove the stereo lock at the back. Now, install the new stereo following the guides from the old one.

Watch the video!


by ScegliAuto

More videos