Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Smart Fortwo headlight bulb replacement

Model: Smart Smart 451 - Years 2007-2015
Part: Headlight bulb

Let's see in this video how to change the light bulb of the small Smart Fortwo subcompact. The procedure is very simple and takes only a few minutes: first remove the hood of the Smart by pressing the part of the black grille (mask) located in the front. Once the hood has been removed, the lighthouse can already be accessed; by removing the rubber part that serves to protect the headlight from water, you can already disconnect the connector and release the tab that holds the bulb in place: proceed with reassembling the new bulb and finally adjust the headlight to your liking.

Posted on 14 June 2020 by ScegliAuto

Video tutorial

Related tutorials

Smart Fortwo 453 headlight bulb replacement
Smart Fortwo 453 headlight bulb replacement
Smart (2014-2022 / 453) In this short and simple guide we will see the main instructions for removing and replacing the headlight bulb of the Smart Fortwo 453. First we open…
How to remove the headlight bulb of a Smart ForTwo?
How to remove the headlight bulb of a Smart ForTwo?
Smart (2004-2006 / 454, Fourfour1) Let's start by removing the front top cover of our Smart ForTwo, using the ignition key, and then removing the plastic underneath. After that, we wil…
How to replace the headlight bulb on the Smart Fortwo
How to replace the headlight bulb on the Smart Fortwo
Smart (2014-2022 / 453) In today's video tutorial we will see how to remove and replace the Smart Fortwo headlight bulb, following the instructions below. First we are going…

Other guides you may be interested in

How to Replace the Timing Belt on a Volkswagen Golf

To perform this simple operation, first lift the bonnet. Then, remove the upper engine cover and the plastic side cover that protects the timing belt. To create more space for the job, you can remove components next to the engine, such as the coolant reservoir, the windscreen washer pipe, and the fuel filter. This will allow you to remove the lower engine cover and the right wheel for better access to the area where you will be working. Now, relieve the tension from the tensioner pulley and remove the belt for replacement.

Watch the video!


by ScegliAuto

More videos