Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Fuses on Smart Fortwo

Model: Smart Smart 451 - Years 2007-2015
Part: Fuse box

Begin by opening the car door and locating the fuses for replacement. Use a plastic lever to remove the cover in the compartment under the dashboard (under the steering wheel if present). Use needle-nose pliers to disconnect the damaged fuses in the compartment. Once this is done, insert the new fuses into their designated slots in the compartment. Close the fuse inspection box with the cover. After replacing all damaged fuses, test the various electrical systems in the car.

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find and How to Access the Cigarette Lighter Fuse on a Smart ForTwo?
Where to Find and How to Access the Cigarette Lighter Fuse on a Smart ForTwo?
Smart (2007-2015 / 451) The cigarette lighter fuse on your Smart ForTwo is located inside the fuse box. The fuse box is situated under the left side of the steering column. …
Location and Diagram of the Fuse Box of the Smart Fortwo
Location and Diagram of the Fuse Box of the Smart Fortwo
Smart (2007-2015 / 451) In this guide, we will see where to find the diagram and location of the fuse boxes of the Smart Fortwo, following the instructions below. First, get…
How to Remove the Headlight Bulb on a Smart ForTwo?
How to Remove the Headlight Bulb on a Smart ForTwo?
Smart (2004-2006 / 454, Fourfour1) Start by removing the upper front cover of your Smart ForTwo using the ignition key, then remove the underlying plastic. Next, unclip and remove the …

Other guides you may be interested in

    Frequently Asked Questions

    • Smart 2007-2015 - Where is the fuel pump relay on a Smart ForTwo located? Read answer

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos