Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Bonnet of the Smart

Model: Smart Smart 451 - Years 2007-2015
Part: Body

In this video tutorial, you can see how simple it is to open the bonnet of a Smart Fortwo by following a few easy steps that will help you manage your vehicle correctly. Opening the front bonnet of the Smart Fortwo is not difficult; if you look at the front air grille, you should notice two plastic pins. To open the bonnet, unclip them by pulling outward. At this point, grab the bonnet and remove it from its seat; perform the maintenance; then reposition the bonnet, which fits onto the front of the Smart through some slots.

Updated on 19 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Bonnet of a 2001 Smart.
How to Open the Bonnet of a 2001 Smart.
Smart (1998-2007 / 450) In this video, you can see how simple it is to open the bonnet of the Smart by following a few easy steps that will give you access to the engine com…
How to Open the Bonnet on Smart Fortwo 450-451
How to Open the Bonnet on Smart Fortwo 450-451
Smart (1998-2007 / 450) In this video tutorial, you will see the instructions for opening the bonnet on a Smart Fortwo 450 and 451 in simple and quick steps. To open the bon…
How to Open and Close the Bonnet of the Smart Fortwo?
How to Open and Close the Bonnet of the Smart Fortwo?
Smart (2014-2022 / 453) Follow these instructions to open and then close the bonnet of a Smart Fortwo: to open the bonnet, release the levers located at the sides of the rad…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos