Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Smart Fortwo muffler

Model: Smart Smart 451 - Years 2007-2015
Part: Exhaust muffler

Let's briefly see the steps necessary to disassemble and replace the Smart Fortwo muffler. First of all, let's move to the rear of the car and start opening the tailgate of the trunk and disassemble the bumper, unscrewing all the fixing screws; then let's unscrew the muffler exhaust manifold screws and remove the central bar of the frame, as shown in the video. At this point we unscrew the screws of the muffler sealing brackets, in order to remove it and replace it with the new one, following the video tutorial to the end!

Posted on 9 February 2023 by ScegliAuto

This video is currently unavailable

Related tutorials

Smart Fortwo muffler disassembly guide
Smart Fortwo muffler disassembly guide
Smart (2007-2015 / 451) Let's find out below the main steps on how to disassemble and replace the Smart Fortwo muffler, following the instructions below. First of all, we op…
How do I replace the cabin filter in the Smart Fortwo 450?
How do I replace the cabin filter in the Smart Fortwo 450?
Smart (2007-2015 / 451) The replacement of the cabin filter of the Smart Fortwo 451 takes about 20 minutes of work. The filter is located inside the passenger compartment, n…
Guide to disassembling the engine of the Smart Fortwo.
Guide to disassembling the engine of the Smart Fortwo.
Smart (1998-2007 / 450) Let's see in this guide the instructions that will allow us to disassemble and replace the entire engine block of the Smart Fortwo. First, we lift th…

How to Replace the Spark Plugs of the Chevrolet Spark

Release and lift the bonnet. The first step is to disconnect the battery plugs to protect all electronic components. Now, remove the bolts securing the cover to the engine, disconnecting the hose on the side as well. Disconnect the connectors on top of the coils and then remove the coils by pulling them straight up after removing the bolts that hold them in place. Now, using a socket wrench, unscrew the spark plugs from the bottom of the newly freed hole, taking care not to let too much dirt enter this cylinder.

Watch the video!


by ScegliAuto

More videos