Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Light Bulb in the Smart Fortwo

Model: Smart Smart 451 - Years 2007-2015
Part: Interior dome light bulb

This guide will show you the steps to remove and replace the cabin light bulb in the Smart Fortwo. First, get inside the vehicle and pry the side of the light unit to detach and remove it; then disconnect the electrical connector from the light unit and remove the small bulb. At this point, install the new bulb and check the light's functionality by reconnecting the electrical supply; finally, refit the light unit to the roof of the vehicle to complete the process!

Updated on 18 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Interior Bulb of the Smart Fortwo 451
How to Replace the Interior Bulb of the Smart Fortwo 451
Smart (2007-2015 / 451) To change the ceiling light bulb of the Smart Fortwo 451 at the rear, use a small flathead screwdriver or a small knife to lever off the passenger si…
How to Replace the Front Fog Light Bulb on a Smart Fortwo
How to Replace the Front Fog Light Bulb on a Smart Fortwo
Smart (2007-2015 / 451) Today, I will explain how to easily and quickly replace the front fog light bulb on a Smart Fortwo vehicle. Pull the release lever for the front bonn…
How to Change the Interior Light Bulb on a Smart Fortwo
How to Change the Interior Light Bulb on a Smart Fortwo
Smart (2007-2015 / 451) How do you replace the interior light bulbs on a Smart car? Let's see how to remove the interior light from the fixing plastics. Pry between the fixi…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos