Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Radiator Fan Replacement for Smart 450

Model: Smart Smart 450 - Years 1998-2007
Part: Radiator

If the coolant temperature tends to rise, it is likely that the cooling fan on the radiator is not activating; replacing this fan is very straightforward. Access the rear engine compartment, disconnect the power connector for the fan motor, unclip the upper fastening tab, and pull upwards to remove the fan along with its motor and support frame. The new replacement is also available in the aftermarket. To install it, simply insert the new fan into its housing, ensuring the lower tabs fit into their respective slots, then reattach the upper tab and the power connector. Start the engine and allow it to reach operating temperature, then check that the new fan operates correctly.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the heating radiator in the Smart ForTwo 450?
How to remove the heating radiator in the Smart ForTwo 450?
Smart (1998-2007 / 450) In this video tutorial we can see how to remove the heating radiator in the Smart ForTwo 450. To do this, we need to remove the entire front of the c…
How to replace the air filter of the Smart 450
How to replace the air filter of the Smart 450
Smart (1998-2007 / 450) If you do not want to have problems with overheating or loss of power of the engine of your Smart 450 then you must necessarily replace the air filte…
Replace the radiator fluid on Smart 450.
Replace the radiator fluid on Smart 450.
Smart (1998-2007 / 450) Replacing the radiator fluid of the Smart 450 is an operation that you can do at home using some specific tools. First, purchase the new antifreeze f…

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos