Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the "Service" light on a Subaru XV?

Model: Subaru Xv MK 1 - Years 2012-2017
Part: Service warning light

To reset the "Service" light on a Subaru XV, turn on the instrument panel without starting the engine and look for the button located under the dashboard panel. This command allows you to access the menu dedicated to the vehicle settings. Hold it down until you see the maintenance area. Navigate through the options using the same button, finding the specific setting for resetting the light. When you find the correct function, press the button to confirm and hold it for a few seconds, allowing the system to complete the update. After performing this operation, turn off the panel and turn it back on to verify that the service message has disappeared. This procedure ensures that future maintenance intervals are monitored without further notifications.

Posted on 1 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the "Service" indicator on a Subaru XV?
How to reset the "Service" indicator on a Subaru XV?
Subaru Xv (2012-2017 / MK 1) To reset the "Service" light on a Subaru XV, you can follow a few steps directly from the car's onboard computer. Start by turning on the car and wai…
How to Reset the Service Light on a Subaru XV?
How to Reset the Service Light on a Subaru XV?
Subaru Xv (2012-2017 / MK 1) To reset the Service light on a Subaru XV, turn on the instrument panel by rotating the ignition key. Once the panel is on, navigate through the menu…
How do you reset the Service light on the Subaru XV?
How do you reset the Service light on the Subaru XV?
Subaru Xv (2012-2017 / MK 1) In order to reset the Service light of the Subaru XV, you will need to turn on the instrument panel by inserting the ignition key into the slot and t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos