Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the radio from the Subaru Outback

Model: Subaru Outback BS, MK 5 - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Car stereo

See other generations:
Video tutorial

In this new guide dedicated to all of you who own a Subaru Outback, we will discover how to correctly and safely remove the factory radio. First of all, get into the car and make sure it is completely turned off, then remove the plastic panels located in the lower area of the central dashboard.

Once you have done that, unscrew all the various screws and pull out the control panel. Immediately after, do the same for the upper part and remove the air vents.

Finally, unscrew the screws around the radio and disconnect the electrical cable.


Posted on 23 January 2025 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on a Subaru Outback
How to Reset the Tyre Pressure Warning Light on a Subaru Outback
Subaru Outback (2009-2014 / BR, BM, MK 4) Before you begin, exit the cabin of your Subaru Outback. Start by checking and inflating the car's tyres until they all reach the correct pressure. N…
How to Change the Time on a Subaru Outback?
How to Change the Time on a Subaru Outback?
Subaru Outback (2014-2019 / BS, MK 5) Good morning, today’s goal is to modify the time on the onboard computer of your Subaru Outback. Start by sitting in the driver’s seat of the vehicle…
Where is the OBD2 Port on the Subaru Outback 5?
Where is the OBD2 Port on the Subaru Outback 5?
Subaru Outback (2014-2019 / BS, MK 5) To access the data from the ECU of your Subaru Outback fifth series, you need to know the exact location of the OBD port to connect a diagnostic tool…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos