Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan Motor on the Subaru Outback

Model: Subaru Outback MK 2, BH, BE - Years 1999-2003
Part: Blower motor

In this video, we will go through the main steps to remove and replace the cabin fan motor or air conditioning fan motor on the Subaru Outback. First, get inside the vehicle and start by removing the glove compartment; then find the air conditioning fan at the back, as shown in the video. Next, disconnect the electrical connector of the resistor and unscrew the screws to remove it; all that’s left is to replace it with the new one, using the original part, and reassemble everything, following the video tutorial to the end!

Updated on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Wiper Motor on a Subaru Outback?
How to Replace the Wiper Motor on a Subaru Outback?
Subaru Outback (2009-2014 / MK 4, BM, BR) To replace the wiper motor on the vehicle, proceed as follows: first, unscrew the fastening nuts of the wiper arms using a 14 mm spanner and remove t…
Where are the fuses located on the Subaru Outback?
Where are the fuses located on the Subaru Outback?
Subaru Outback (2014-2019 / BS, MK 5) The fuses on the Subaru Outback are divided between two fuse boxes located in the vehicle: in this model, one of the fuse boxes is located inside the…
How to Replace the Cabin Filter in a Subaru Outback?
How to Replace the Cabin Filter in a Subaru Outback?
Subaru Outback (2014-2019 / BS, MK 5) Replacing the cabin air filter in a Subaru Outback is very simple; let's see how to proceed in this video. The filter is located behind the glove com…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos