Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on Subaru Outback

Model: Subaru Outback BS, MK 5 - Years 2014-2019
Part: Tire pressure warning light

Today's instructions will show you how to reset the tyre pressure warning light on the Subaru Outback, as well as the Forester. Before performing the reset, ensure all four tyres are at the correct operating pressure. Then, get in the vehicle and turn on the ignition. Next, scroll through the onboard computer options until you reach the tyre pressure monitor. Press and hold the "set" button located at the bottom of the steering wheel for a few seconds to reset the light, which will be cleared from the display. Finally, turn off the ignition and start the engine!

Updated on 1 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on a Subaru Outback
How to Reset the Tyre Pressure Warning Light on a Subaru Outback
Subaru Outback (2009-2014 / MK 4, BM, BR) Before you begin, exit the cabin of your Subaru Outback. Start by checking and inflating the car's tyres until they all reach the correct pressure. N…
How do you reset the tire pressure light on the Subaru Outback?
Subaru Outback (2014-2019 / BS, MK 5) To reset the tire pressure light on the Subaru Outback, you will need to inflate the tires until they reach the correct pressure value: this value wi…
How do you reset the tire pressure light on the Subaru Outback?
How do you reset the tire pressure light on the Subaru Outback?
Subaru Outback (2014-2019 / BS, MK 5) The tire pressure warning light on the Subaru Outback can be completely reset by inflating the tires to the optimal pressure level indicated on the s…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos