Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Air Filter on the Subaru Ascent

Model: Subaru Ascent MK 1 - Years 2018-2026
Part: Air filter

Do you want to replace the air filter yourself on this vehicle model? In the description below, you will find all the useful information and correct instructions to perform the replacement DIY. Once you open the hood, the filter is located on the right side. To access the filter, simply remove the steel clips located above the filter box. Then, move the cover to access the filter and remove it. Take the new filter, insert it into the compartment, reposition the cover correctly, and reattach the securing clips.

Updated on 2 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Cabin Air Filter on a Subaru Ascent
How to Change the Cabin Air Filter on a Subaru Ascent
Subaru Ascent (2018-2026 / MK 1) Replacing the cabin air filter on a Subaru Ascent is a simple task you can do yourself, thanks to our video tutorial that will guide you through the …
How to Replace the Air Filter in a Subaru Ascent?
How to Replace the Air Filter in a Subaru Ascent?
Subaru Ascent (2018-2026 / MK 1) To replace the air filter in a Subaru Ascent, open the hood to locate the filter box positioned near the right headlight. By unfastening the two secu…
How to Replace the Cabin Air Filter on a Subaru Ascent?
How to Replace the Cabin Air Filter on a Subaru Ascent?
Subaru Ascent (2018-2026 / MK 1) To replace the cabin air filter on a Subaru Ascent, open the glove compartment located on the passenger side to release the internal fastening clips.…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos