Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Timing Belt

Model: Subaru Outback BL, BP, MK 3 - Years 2003-2009
Part: Timing belt

The timing belt is a crucial component for the operation of the entire automotive system. In this description, you will see how to replace it quickly and without too much effort. To remove it, you need to unscrew the bolt located at the centre of the largest pulley. Now you can take it off completely and position the new belt. Pass the belt around the largest pulley and through all the necessary pulleys, then tighten the bolt on the largest pulley again to ensure the belt adheres correctly to all the pulleys.

Updated on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Timing Belt Replacement
Timing Belt Replacement
Subaru Outback (2003-2009 / BL, BP, MK 3) Release and open the bonnet. Disconnect the negative battery cable to protect any electronic components. Now, remove the air intake above the bumper …
Replacement of the Serpentine and Auxiliary Belts
Replacement of the Serpentine and Auxiliary Belts
Subaru Outback (2003-2009 / BL, BP, MK 3) Open and lift the bonnet. Now, remove the air duct that directs air to the filter. Also, remove the belt covers, both the plastic and metal parts. To…
Replacing the Serpentine Belt on the Subaru Outback 3.6L
Replacing the Serpentine Belt on the Subaru Outback 3.6L
Subaru Outback (2009-2014 / MK 4, BM, BR) In today's video tutorial, you will see the steps to remove and replace the serpentine belt on the Subaru Outback with a 3.6-litre engine. First, ope…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos