Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Auxiliary Belts on a Mini

Model: Subaru Outback BL, BP, MK 3 - Years 2003-2009
Part: Timing belt

Lift the lever located at the bottom left of the dashboard, insert your fingers under the bonnet, and pull the release lever, then secure it. Using a spanner, disconnect the battery cable and detach the air duct with a flat screwdriver. Unscrew the metal cover bolts with a socket and extension, then remove the upper bar near the alternator. Unscrew the belt tensioner and remove both belts. Fit the new belts, ensuring they are properly tensioned, and reattach the belt covers along with the air duct. Finally, reconnect the battery terminal.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Main Seal
How to Replace the Rear Main Seal
Subaru Outback (2003-2009 / BL, BP, MK 3) I will explain how to replace the rear main seal of your car. Disconnect the battery, remove all connectors near the alternator, and take it out alon…
Replacement of the Serpentine and Auxiliary Belts
Replacement of the Serpentine and Auxiliary Belts
Subaru Outback (2003-2009 / BL, BP, MK 3) Open and lift the bonnet. Now, remove the air duct that directs air to the filter. Also, remove the belt covers, both the plastic and metal parts. To…
How to reset the maintenance lights on a Subaru Outback?
How to reset the maintenance lights on a Subaru Outback?
Subaru Outback (2014-2019 / BS, MK 5) Each maintenance light (oil change, tyre rotation, etc.) on the Subaru Outback can be reset through the radio display using the touchscreen. First, p…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos