Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Car Radio and Centre Console

Model: Subaru Legacy BL, MK 4, BP - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Car stereo

See other generations:
Video tutorial

Using a plastic tool to avoid damaging the bodywork, lever at the base of the tunnel around the gearbox to detach the plastic clips and remove it. To facilitate removal, unscrew the gear knob. Disconnect the electrical wiring connectors.

Unscrew the fixing screws of the driver's side panel and remove it. Do the same with the other panel. Unscrew the fixing screws of the radio console and carefully remove it until it slides out of the support.

Disconnect the connectors attached to the radio to easily remove the entire unit. Refit the new radio by reversing the operations.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Subaru Legacy (2003-2009 / BL, MK 4, BP) The cabin air filter is located centrally, just behind the console: to access it, you will need to remove the glove box; first, open the glove box do…
Engine Oil and Oil Filter Replacement
Engine Oil and Oil Filter Replacement
Subaru Legacy (2009-2014 / BM, BR, MK 5) Position the vehicle on a lift and remove the plastic cover under the engine. Unscrew the drain plug located at the centre of the oil sump and collec…
Removing the Front Bumper on Subaru Legacy
Removing the Front Bumper on Subaru Legacy
Subaru Legacy (2009-2014 / BM, BR, MK 5) Remove the protective cover above the right front headlamp. Using a flat-head screwdriver, a wedge, or your preferred tool, remove the nine clips sec…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos