Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Spark Plugs on Suzuki Swift 3

Model: Suzuki Swift MK 4, Rs41 - Years 2004-2010
Part: Spark plugs

To replace the spark plugs on a Suzuki Swift, first, place the car on a ramp or in a stable, immobile position. Open the front bonnet and secure it in the open position. Now, using a flat screwdriver, unclip the clips that secure the air filter. Using the appropriate tool, unscrew the bolts (as shown in the images) that hold the air filter block in place. Disconnect the air filter connector and proceed to remove the entire block. Next, remove the cylinder head cover and disconnect (in the correct sequence to remember for reassembly) the electrical supply to the spark plugs. Now you can disconnect and remove the ignition coil. Unscrew and remove the spark plugs, placing them in the order they are arranged in the cylinder head. Finally, insert the new spark plugs into the cylinder head after applying some lubricant to the threads. At this point, you're done! Reassemble everything by following the steps in reverse.

Updated on 4 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Suzuki Swift (2010-2017 / Rs41, AZG, MK 5) In this video tutorial, you will see how to remove and replace the engine spark plugs on a third-generation Suzuki Swift. First, open the engine bonn…
Suzuki Swift (2004-2010 / MK 4, Rs41) Before you can begin, open the bonnet of your Suzuki Swift. Start by unscrewing and removing the screws that secure the air filter housing and its as…
Suzuki Swift (2010-2017 / Rs41, AZG, MK 5) To replace the spark plugs of the Suzuki Swift, open the bonnet to access the components located at the top of the engine bay. Here, detach the plast…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos