Do it yourself
| ||||
|
Suzuki Grand Vitara - Video tutorial
Model: Suzuki Grand Vitara
MK 2
- Years 2005-2015 Required: ATF3309 transmission fluid, funnel with tube, set of fixed wrenches, gloves. Procedure: Raise the machine on a workshop bridge. Locate the drain hole which is next to the crosshead. IMPORTANT: the filling must be carried out with the same quantity of liquid that will come out. Putting less or more could seriously compromise the operation of the gearbox. Typically the gearbox for this engine series accommodates 3.5 liters of lubricant. Use a 14 mm wrench to unscrew the cap and collect the liquid in a tray. Replace the cap and tighten it. Measure the liquid carefully with a measuring cup and fill slowly. The intake pipe is located exactly behind the vehicle's engine (see video). Close the tube with the rod. Carry out a test ride with the vehicle and make sure that even when the engine is hot, the lubricant level does not exceed the upper mark on the dipstick.
Posted on 15 December 2023 by ScegliAuto
Other guides that may interest you
|
How to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.016
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |