Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Bumper on a Suzuki Alto

Model: Suzuki Alto MK 7 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Front bumper

See other generations:
Video tutorial

Working with the engine off and the handbrake engaged, lift the bonnet and secure it. Unscrew the 10 mm bolts located at the top of the bumper, near the engine compartment, as shown in the video. In the same area, remove the plastic clips.

Once done, unscrew the cross-head screws located in the two wheel arches with a screwdriver. Now work under the front bumper, removing the plastic clips securing it here as well.

At this point, you can extract the bumper from its position, being careful not to damage the clips. Good luck and see you next time!


Updated on 26 April 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Rear Bumper of the Suzuki Alto
Guide to Replacing the Rear Bumper of the Suzuki Alto
Suzuki Alto (2008-2014 / MK 7) Follow this brief guide for the main instructions to remove and replace the rear bumper of the Suzuki Alto, using these simple steps. First, open the…
How to Replace the Spark Plugs on a Suzuki Alto
How to Replace the Spark Plugs on a Suzuki Alto
Suzuki Alto (2008-2014 / MK 7) Before starting, open the bonnet of your Suzuki Alto. Begin by removing the air filter housing, unscrewing the screws and bolts, then disconnect the …
How to Change the Number Plate Bulb on a Suzuki Alto
How to Change the Number Plate Bulb on a Suzuki Alto
Suzuki Alto ( 200-2015 / ) How to change the number plate bulb on a Suzuki Alto? Follow these steps. Use a lever to remove the plastic cover of the light located in the rear bu…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos