Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse box schema and positioning of Tata Zest.

Model: Tata Zest MK 1 - Years 2014-2019
Part: Fuse box

The information provided below will show us the positioning and layout of the fuse boxes of the Tata Zest. First, we open the car's hood and start by removing the plastic cover next to the battery, accessing the external fuses; we find the internal fuse box on the driver's side, removing the plastic cover located below the steering wheel, as shown in the video. At this point, we find the fuse layout in the owner's manual and sometimes inside the covers; replace any faulty fuses with new ones!

Posted on 10 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Where Are the Fuses Located in the Tata Zest?
Where Are the Fuses Located in the Tata Zest?
Tata Zest (2014-2019 / MK 1) The fuses in the Tata Zest are located in dedicated fuse boxes installed in the vehicle. This type of vehicle has two fuse boxes. The first is locate…
How to Replace the Key Battery in a Tata Zest
How to Replace the Key Battery in a Tata Zest
Tata Zest (2014-2019 / MK 1) Replacing the button battery in your Tata Zest key takes just a few minutes, and with this guide, you can complete it easily. First, ensure you have …
How to Replace the Cabin Air Filter on Tata Zest
How to Replace the Cabin Air Filter on Tata Zest
Tata Zest (2014-2019 / MK 1) To replace the cabin air filter on the Tata Zest, you need to remove the panel on the side of the footwell on the driver's side, near the center cons…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos