Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light on the Tata Indica?

Model: Tata Indica MK 1 - Years 1998-2008
Part: Tail light

In this tutorial, you will see how to remove the rear light on the Tata Indica, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, open the boot and move the seal enough to access the two bolts. Once both are undone, move inside the wheel arch and remove the indicated plastic block. At this point, grasp the light, pull it towards you, and extract it from the bodywork. Finally, fit the replacement part by simply following the reverse procedure.

Updated on 23 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulbs on a Tata Indica?
How to Replace the Front Headlamp Bulbs on a Tata Indica?
Tata Indica (1998-2008 / MK 1) As shown in this tutorial, replacing the front headlamp bulbs on a Tata Indica is a very simple and quick task. You will only need a 10 mm spanner. S…
How to Replace the Spark Plugs on a Tata Indica
How to Replace the Spark Plugs on a Tata Indica
Tata Indica (1998-2008 / MK 1) To replace the spark plugs on a Tata Indica, open the bonnet to access the components inside the engine bay. At the front of the engine block, locate…
Where to Find the Fuse Box on Tata Indica
Where to Find the Fuse Box on Tata Indica
Tata Indica (1998-2008 / MK 1) In this mini guide regarding the Tata Indica, we will discover exactly where the fuse box is located within the vehicle. For your personal safety, re…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos