Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulbs on the Tata Indica

Model: Tata Indica MK 1 - Years 1998-2008
Part: Tail light bulb

In this tutorial, see how to replace the rear light bulbs on the Tata Indica, a very simple operation. First, to access the bulb to be replaced, remove the light unit. Open the boot, unscrew the two screws along the inner edge of the light unit, remove the screw accessible from the wheel arch, then grasp it, pull it towards you and extract it from the bodywork. At this point, extract the bulb holder by turning it slightly anti-clockwise, and once the bulb is replaced, reassemble everything by following the reverse procedure.

Updated on 9 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plugs on a Tata Indica
How to Replace the Spark Plugs on a Tata Indica
Tata Indica (1998-2008 / MK 1) To replace the spark plugs on a Tata Indica, open the bonnet to access the components inside the engine bay. At the front of the engine block, locate…
Where to Find the Fuse Box on Tata Indica
Where to Find the Fuse Box on Tata Indica
Tata Indica (1998-2008 / MK 1) In this mini guide regarding the Tata Indica, we will discover exactly where the fuse box is located within the vehicle. For your personal safety, re…
How to Replace the Battery in the Tata Indica
How to Replace the Battery in the Tata Indica
Tata Indica (1998-2008 / MK 1) In this tutorial, see how to replace the battery in the Tata Indica, a very simple and quick operation. You will only need a 10mm spanner. First, ens…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos