Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Parking Lights on a Tata Tigor?

Model: Tata Tigor MK 1 - Years 2017-2024
Part: Headlight bulb

In this tutorial, we will see how to replace the bulbs for the parking lights on a Tata Tigor, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by opening the hood, then locate the thin wire at the bottom of the headlight. Next, remove the white socket by slightly turning it counterclockwise. At this point, you can remove the old bulb and insert a replacement, preferably an LED type, to minimize consumption and maximize output.

Updated on 27 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light of the Tata Tigor?
Tata Tigor (2017-2024 / MK 1) To replace the rear light of the Tata Tigor, open the hood to access the interior of the trunk near the light to be removed: here, detach the carpet …
How to Replace the Rear Tail Light on the Tata Tigor
How to Replace the Rear Tail Light on the Tata Tigor
Tata Tigor (2017-2024 / MK 1) This guide shows how to replace the rear tail light located on the trunk hatch of the Tata Tigor. After removing the interior trim panel on the hatch…
Replacing the Headlight Bulb on the Tata Tigor
Replacing the Headlight Bulb on the Tata Tigor
Tata Tigor (2017-2024 / MK 1) In this short and simple guide, you will learn how to remove and replace the headlight bulb on the Tata Tigor, following the instructions below. Firs…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos