Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Clean the Radiator and Cooling System with Citric Acid in the Tata Sumo

Model: Tata Sumo Gold - Years 2012-2019
Part: Radiator

In this video, you will learn how to clean the radiator and cooling system with citric acid in the Tata Sumo. First, open the cap of the cooling system where the thermostat that measures the temperature is installed. Disconnect the rubber hose that connects the radiator to the system. Remove the radiator cap and the cap from the coolant reservoir. Now, start adding clean water to both the radiator and the reservoir, followed by a small amount of detergent. Finally, add some powdered citric acid as shown in the video. Close all the caps, start the engine, and let the mixture inside the system do the cleaning.

Updated on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuse Box of the Tata Sumo
Where to Find the Fuse Box of the Tata Sumo
Tata Sumo (2008-2016 / Grande) If you are looking for the fuse box in your Tata Sumo but haven't found it yet, don't worry because this guide will help you resolve any doubts. Firs…
How to Replace the Head Gasket on a Tata Sumo
How to Replace the Head Gasket on a Tata Sumo
Tata Sumo (2004-2011 / Victa) In today's tutorial video, we will see the steps to disassemble and replace the head gasket on a Tata Sumo. First, open the hood of your car and star…
How to Replace the Oil Filter on a Tata Sumo?
How to Replace the Oil Filter on a Tata Sumo?
Tata Sumo (2012-2019 / Gold) To replace the oil filter on a Tata Sumo, access the lower part of the engine compartment near the left front wheel. Here, locate the oil filter, whi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos