Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the V-Belt on a Tata Winger

Model: Tata Winger MK 1 - Years 2007-2019
Part: V-belt

If you need to replace the V-belt, or accessory belt, on this type of vehicle, follow the instructions in the video and the description below. After opening the engine compartment, locate the belt at the front of the engine just behind the radiator. Next, loosen the tensioner pulley to remove the belt and then replace it with the new one. After that, re-tension the belt by tightening the tensioner pulley, and the job will be complete.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Diesel Filter in a Tata Winger Van?
How to Replace the Diesel Filter in a Tata Winger Van?
Tata Winger (2007-2019 / MK 1) In this tutorial, we will see how to replace the diesel filter in a Tata Winger van, an extremely simple and quick operation. First, ensure that the …
How to Replace the Rear Brake Shoes on a Tata Winger?
How to Replace the Rear Brake Shoes on a Tata Winger?
Tata Winger (2007-2019 / MK 1) To replace the rear brake shoes on a Tata Winger, lift the rear of the vehicle so it is not in contact with the ground. Then, loosen the wheel and dr…
How to Renew the Headlights of the Tata Winger?
How to Renew the Headlights of the Tata Winger?
Tata Winger (2007-2019 / MK 1) In this video, you can see how to renew the headlights of the Tata Winger, but keep in mind that the time required to perform this operation is signi…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos