Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the external rearview mirror of the Tesla Model 3

Model: Tesla Model 3 MK 1 - Years 2017-2024
Part: Side mirror

Today's instructions will guide us through the process of disassembling and replacing the external rearview mirror of the Tesla Model 3. First, we open the front door of the car and start removing the plastic cover located behind the mirror; then we disconnect the small electrical connector and remove the protective film, as shown in the video. At this point, we pry on the side of the door panel to detach it at the top, allowing us to unscrew the mirror screws; we then remove the old mirror externally and replace it with the new one!

Posted on 17 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the mirror cap of the Tesla Model 3 rearview mirror?
How do you replace the mirror cap of the Tesla Model 3 rearview mirror?
Tesla Model 3 (2017-2024 / MK 1) It will be possible to replace the mirror cap of the Tesla Model 3 by levering with an object to detach the hooks located at the bottom of the cap: o…
How and where do you position the Télépéage highway badge on your Tesla Model 3?
How and where do you position the Télépéage highway badge on your Tesla Model 3?
Tesla Model 3 (2017-2024 / MK 1) So, if you have a Tesla and want to put the Télépéage badge without going crazy at the toll booths, here's how to do it. The problem is that the wind…
How to replace the battery of the Tesla Model 3 remote control
How to replace the battery of the Tesla Model 3 remote control
Tesla Model 3 (2017-2024 / MK 1) In the following guide you will find the description of all the steps necessary to replace the battery of your Tesla Model 3 remote control. First of…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos