Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Tesla Model 3 remote control

Model: Tesla Model 3 MK 1 - Years 2017-2024
Part: Key

In the following guide you will find the description of all the steps necessary to replace the battery of your Tesla Model 3 remote control. First of all, you need to purchase a new CR2032 battery and make sure you also have a small flathead screwdriver available. At this point, take your Tesla Model 3 remote control and remove the back cover with the help of the screwdriver. Once you have done this, also remove the old battery and replace it with the new one. Finally, reassemble the back cover and you're done.

Posted on 11 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the remote battery in the Tesla Model 3?
How to replace the remote battery in the Tesla Model 3?
Tesla Model 3 (2017-2024 / MK 1) In this tutorial, you will see how to replace the battery in the Tesla Model 3, a very simple and inexpensive operation. For this, you will need a re…
How do you reset the tire pressure light on the Tesla Model 3?
How do you reset the tire pressure light on the Tesla Model 3?
Tesla Model 3 (2017-2024 / MK 1) To reset the tire pressure warning light of the Tesla Model 3, first you will need to inflate the tires until they reach the optimal pressure value: …
How to Reset the Tire Pressure Light on a Tesla Model 3?
How to Reset the Tire Pressure Light on a Tesla Model 3?
Tesla Model 3 (2017-2024 / MK 1) You can reset the tire pressure light on a Tesla Model 3 by inflating the tires to the optimal pressure value: this value will be listed on the stick…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos