Do it yourself
Frequently asked questions about cars and motorcycles

How to change the cabin air filter for the Tesla Model S DIY

Model: Tesla Model S MK 1 - Years 2012-2024
Part: Cabin air filter

On your Tesla Model S, the cabin air filter is accessed from the front compartment, in the area of the air intake for the air conditioning. Before you begin, park on a flat surface, put the car in Park (P), turn off the ventilation, and work calmly with the hood open, avoiding forcing any plastics. Open the front compartment and remove the cover/plastic that closes the upper area near the windshield, providing access to the location of the filter housing. Once you locate the flap or closure of the filter compartment, unlock it and open it just enough to slide out the used filter. Carefully pull out the element to avoid dropping any debris, and if you notice leaves or dust in the housing, gently clean the edge before installing the replacement. Insert the new filter, ensuring it is oriented correctly as indicated on the filter itself, and push it in until it is fully seated without bending it more than necessary. If your version has two elements, replace both in the same manner. Close the flap, reattach the removed covers, and check that all fastenings are secure. Once finished, reactivate the ventilation to ensure that the airflow is regular and that there are no unusual noises coming from the hood area.

Posted on 3 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Tesla Model S (2012-2024 / MK 1) In this video tutorial, you will see how to replace the cabin air filter on a Tesla Model S. It is recommended to replace the filter every 9,300 mile…
Tesla Model S (2012-2024 / MK 1) In order to replace the cabin filter of the Tesla Model S, you need to open the front hood so that you can access the corresponding cargo compartment…
Tesla Model S (2012-2024 / MK 1) On the Tesla Model S, replacing the cabin air filter is done by accessing the air intake assembly at the front: before starting, secure the vehicle, …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos