Do it yourself
Frequently asked questions about cars and motorcycles

How to DIY replace the cabin air filter in the Tesla Model S

Model: Tesla Model S MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Cabin air filter

Video tutorial

On the Tesla Model S, replacing the cabin air filter is done by accessing the air intake assembly at the front: before starting, secure the vehicle, turn off the air conditioning, and work with the vehicle stationary and the hood open. Depending on the version, you may need to clear access by removing some plastic covers and possibly the front well liner to reach the filter access door.

Once you locate the filter access cover, open it carefully and slide out the used filter without shaking it too much to avoid dropping dust and debris into the duct. Before inserting the replacement, check the installation direction indicated on the filter (usually marked by an airflow arrow) and follow it. Close the filter access cover properly, reposition the removed covers, and verify at the end that everything is in place without gaps or air leaks.

Turn the air conditioning back on and check that the ventilation is normal and there are no unusual noises: if you hear vibrations or whistling, it usually indicates the filter is not seated properly or the cover is not closed well.


Posted on 8 July 2026 by ScegliAuto


Related tutorials

Tesla Model S (2012-2024 / MK 1) In this video tutorial, you will see how to replace the cabin air filter on a Tesla Model S. It is recommended to replace the filter every 9,300 mile…
Tesla Model S (2012-2024 / MK 1) In order to replace the cabin filter of the Tesla Model S, you need to open the front hood so that you can access the corresponding cargo compartment…
Tesla Model S (2012-2024 / MK 1) To replace the cabin filter on a Tesla Model S, open the glove compartment on the passenger side to loosen the bolts securing the compartment. It can…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos