Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the engine mount of the Toyota Yaris

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Engine mount

Today's instructions will show us how to disassemble and replace the motor mount of the Toyota Yaris. First, we lift the vehicle and start by removing the lower engine cover; then we position the jack under the engine to keep it lifted and unscrew the motor mount bolts that we find next to it using a socket wrench with an extension, accessing it from the engine compartment, as shown in the video. At this point, we proceed to install the new motor mount, mounting it in the correct direction; once the mount is secured, we can remove the jack from under the engine.

Posted on 15 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the battery of the Toyota Yaris 1.3 VVT-I
Replacement of the battery of the Toyota Yaris 1.3 VVT-I
Toyota Yaris (2005-2011 / Xp90) The following steps will show us the process of disassembly and replacement of the battery of the Toyota Yaris 1.3 VVT-I. First, we open the hood of …
Battery replacement for Toyota Yaris 1.3 VVT-i
Battery replacement for Toyota Yaris 1.3 VVT-i
Toyota Yaris (2005-2011 / Xp90) Shortly, we will see the instructions that will allow us to disassemble and replace the battery of the Toyota Yaris 1.3 VVT-i. First, we open the hoo…
How to replace the battery of the Toyota Yaris
How to replace the battery of the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Today's instructions will show us the process of disassembling and replacing the battery of the Toyota Yaris. First, we open the hood of the car and …

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos