Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the fuel pump in the Toyota Camry?

Model: Toyota Camry Xv40 - Years 2006-2013
Part: Fuel pump

In this tutorial we can see how to disassemble the fuel pump in the Toyota Camry, an extremely simple and quick operation. Before proceeding, open the hood and disconnect the negative terminal of the battery, in order to work safely. Start by opening the rear doors, then grab the seat of the sofa and separate it from the base. Next, remove the circular cap in the center, disconnect both the power connector and the fuel line, and, using an 8mm hex key, unscrew the various fixing bolts. At this point, we can remove the pump and install the replacement.

Posted on 21 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Pump on a Toyota Camry V6
How to Replace the Fuel Pump on a Toyota Camry V6
Toyota Camry (2006-2013 / Xv40) In this brief guide, learn how to remove and replace the fuel pump on a Toyota Camry V6 by following the instructions below. First, access the rear o…
Where is the fuel pump located in the Toyota Camry?
Where is the fuel pump located in the Toyota Camry?
Toyota Camry (1997-2001 / Xv20) In this video, you can see where the fuel pump is located in the Toyota Camry and how to proceed if you need to replace it, a very simple and quick o…
Where is the fuel pump located in the Toyota Camry?
Where is the fuel pump located in the Toyota Camry?
Toyota Camry (2011-2019 / Xv50) In this video we can see where the fuel pump is located in the Toyota Camry and how to proceed in case we need to replace it, a very simple and quick…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos