Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump on a Toyota Camry V6

Model: Toyota Camry Xv40 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Fuel pump

See other generations:
Video tutorial

In this brief guide, learn how to remove and replace the fuel pump on a Toyota Camry V6 by following the instructions below. First, access the rear of the vehicle and remove the rear seat; then remove the fuel pump cover, disconnecting the electrical connector and the fuel lines as shown in the video.

At this point, unscrew the pump retaining ring to remove it and replace it with the new one, using the original part; properly install the pump onto the tank, checking the condition of the fuel lines.


Updated on 8 May 2026 by ScegliAuto


Related tutorials

Where is the fuel pump located in the Toyota Camry?
Where is the fuel pump located in the Toyota Camry?
Toyota Camry (1997-2001 / Xv20) In this video, you can see where the fuel pump is located in the Toyota Camry and how to proceed if you need to replace it, a very simple and quick o…
How to Remove the Fuel Pump in a Toyota Camry?
How to Remove the Fuel Pump in a Toyota Camry?
Toyota Camry (2006-2013 / Xv40) In this tutorial, you will see how to remove the fuel pump in a Toyota Camry, a very simple and quick operation. Before proceeding, open the hood and…
Where is the fuel pump located in the Toyota Camry?
Where is the fuel pump located in the Toyota Camry?
Toyota Camry (2011-2019 / Xv50) In this video we can see where the fuel pump is located in the Toyota Camry and how to proceed in case we need to replace it, a very simple and quick…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos