Do it yourself
Frequently asked questions about cars and motorcycles

How to activate or deactivate the all-wheel drive of the Toyota RAV4

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part: Checks and maintenance

In this guide, we will quickly explain how to use the all-wheel drive and how to activate or deactivate it on the Toyota RAV 4. First, get into the car and start the engine; if the car has a selectable all-wheel drive, you will find the appropriate button on the side of the steering wheel and on the dashboard, as shown in the video. By pressing the button, you can activate or deactivate the car's all-wheel drive (the yellow warning light on the instrument panel will indicate whether it is on or off); you can activate or deactivate the 4x4 mode at any time.

Posted on 26 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Toyota Rav 4 (2013-2018 / MK 4, Xa40) Below we will see the instructions that will allow us to activate and deactivate the 4x4 all-wheel drive of the Toyota RAV 4. First of all, we get in…
Toyota Rav 4 (2006-2013 / MK 3, Xa30) In this short guide we will see the instructions that will allow us to activate and deactivate the 4x4 all-wheel drive (4WD) of the Toyota RAV 4. Fir…
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Below are the steps to activate or deactivate the 4x4 traction on a Toyota RAV4, following the instructions provided. First, get in the vehicle and s…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos