Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to restore the timing belt warning light on the Toyota Hi-lux MK6

Model: Toyota HiLux N160, N140, N150, N170 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Warning light – error code

See other generations:
Video tutorial

In this video, we can see how to reset the timing belt warning light on a sixth generation Toyota Hi-lux after replacing it. To do this operation, a basic knowledge of electronics is required because we will have to remove the electronic plate from the instrument panel, and - following the instructions visually given by the youtuber - we remove the plug found on the right of the central socket, wait a few moments and then put it back in place, in order to reset the system.

We can now put the plate back in place inside the cluster and we will see that the warning light has been reset.


Posted on 9 January 2025 by ScegliAuto


Related tutorials

How to reset the T-Belt light on the Toyota Hi Lux
How to reset the T-Belt light on the Toyota Hi Lux
Toyota HiLux (2005-2015 / MK 7, An10, An20, An30) The T-Belt indicator on the Toyota Hi Lux indicates that the timing belt needs to be replaced, this replacement should occur every 150,000 km. To res…
How to remove the T-belt indicator on the Toyota Hilux
How to remove the T-belt indicator on the Toyota Hilux
Toyota HiLux (2005-2015 / MK 7, An10, An20, An30) In this video, we see how to reset the warning light for the replacement of the timing belt (T-Belt) on the Toyota Hilux: first, make sure that the o…
How to Replace the Timing Belt on a 2013 Toyota Hi Lux
How to Replace the Timing Belt on a 2013 Toyota Hi Lux
Toyota HiLux (2005-2015 / MK 7, An10, An20, An30) After driving 37,282 miles, it is time to replace the timing belt on your 2013 Toyota Hi Lux. Today's video will guide you through the steps to repla…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos