Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the fuel door on the Toyota Auris

Model: Toyota Auris E150 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Fuel cap

See other generations:
Video tutorial

Opening the fuel door to refuel at the gas pump is a very simple and quick operation to do independently. To open the fuel door, we need to get inside the car, turn off the engine, and pull the lever located near the driver's door.

Once the lever is pulled, the door will open without any issues. If there are problems with the opening, it may be necessary to check and replace the fuse of the central locking system or the fuel door.

Another issue may be due to wear of the cap, in this case it is necessary to use WD40 lubricant.


Posted on 15 January 2025 by ScegliAuto


Related tutorials

How to Open and Access the External Fuse Box of a Toyota Auris?
How to Open and Access the External Fuse Box of a Toyota Auris?
Toyota Auris (2007-2012 / E150) Today, let's go through the steps to open and access the external fuse box of a Toyota Auris, including retrieving the fuse diagram. First, open the …
How to Open a Stuck Boot Lid on a Toyota Auris?
How to Open a Stuck Boot Lid on a Toyota Auris?
Toyota Auris (2007-2012 / E150) In a Toyota Auris, the boot lid may become stuck due to a problem with the lock or its mechanism. In this case, you can perform an emergency manual o…
How to Replace the Front Headlight Bulb on the Toyota Auris
How to Replace the Front Headlight Bulb on the Toyota Auris
Toyota Auris (2012-2018 / E180) To replace the front headlight bulb on the Toyota Auris, open the bonnet to access the engine compartment. This will allow you to loosen the screws s…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos