Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil light on a Toyota

Model: Toyota Toyota Various
Part: Service warning light

The oil warning light reset follows simple and quick steps to be carried out independently. Today, specifically, we will show you the steps to reset the light on a Toyota vehicle. First, we proceed with the oil change and immediately after we proceed with the reset. We press the button on the instrument panel while simultaneously turning on the vehicle's instrument panel, we keep the button pressed until the light goes out. We conclude all the steps by turning off the instrument panel and then turning it back on. On Toyota vehicles, even the latest generation ones, this procedure remains unchanged.

Posted on 6 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the TPMS Light on a Toyota Crown
How to Reset the TPMS Light on a Toyota Crown
Toyota Toyota Various Today, I will explain how to reset the tyre pressure warning light on a Toyota Crown vehicle. Unlike many cars where you need to access the settings …
How to reset the service light on the Toyota Scion TC
How to reset the service light on the Toyota Scion TC
Toyota Toyota Various The maintenance light on a Toyota Scion TC vehicle turns on when it is necessary to perform maintenance or an oil change. After solving the problem b…
How to reset the AdBlue warning light on the Toyota
How to reset the AdBlue warning light on the Toyota
Toyota Toyota Various The AdBlue warning light on diesel vehicles activates when the level of fluid in the tank is below the required level. To reset the warning light, yo…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos