Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the lock cylinder in the Toyota Corolla?

Model: Toyota Corolla MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Door lock

See other generations:
Video tutorial

In this tutorial we can see how to disassemble the lock cylinder in the Toyota Corolla, an extremely simple and quick operation. First of all, we open the door in which we will work, then we locate the small rubber plug placed on the inner edge, at the same height as the handle, and remove it. We then loosen the bolt accessible from the hole using a Torx T30 key, grasp the lock cylinder and remove it from the door.

At this point, all that remains is to insert the replacement, and reassemble everything following the reverse procedure.


Posted on 11 April 2025 by ScegliAuto


Related tutorials

Removing the Lock from a Toyota Corolla
Removing the Lock from a Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) In this video tutorial, you will learn how to remove the door lock from a Toyota Corolla. First, open the front door and remove the side plastic cap.…
How to Remove the Ignition Cylinder in a Toyota Corolla?
How to Remove the Ignition Cylinder in a Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) In this tutorial, you will see how to remove the ignition cylinder in a Toyota Corolla, a very simple and quick operation. First, go inside the cabin…
Removing the Clutch Cylinder on Toyota Corolla VVT-I
Removing the Clutch Cylinder on Toyota Corolla VVT-I
Toyota Corolla (2000-2007 / MK 2) Here are the instructions to remove the clutch pump or cylinder on a Toyota Corolla with a VVT-I engine, in this case with the gearbox removed from t…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos