Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of a Toyota Rav 4 key

Model: Toyota Rav 4 MK 5, Xa50 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Key

See other generations:
Video tutorial

In this tutorial we can see the procedure to follow to replace the battery of the remote control of a Toyota Rav 4 car. The necessary materials will be a CR 2032 3V battery and a screwdriver with a flat tip. First of all, you will need to extract the metal key inside the remote control: to do this, you will need to release the lever on the upper edge of the shell and then simply pull out the key. At this point, insert the tip of the key into the groove on the upper edge of the shell and lever it to open it. Finally, take the screwdriver and use the tip to lever on the edges of the battery to remove it and proceed with its replacement.


Posted on 17 April 2025 by ScegliAuto


Related tutorials

Replacing the Key Battery in a Toyota Rav 4
Replacing the Key Battery in a Toyota Rav 4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Let's see how to change the key battery in a Toyota Rav 4. Take your ignition key and use a screwdriver to pry between the two plastic halves until t…
How to Replace the Key Battery on the Toyota RAV 4
How to Replace the Key Battery on the Toyota RAV 4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) If you want to replace the battery inside your Toyota RAV 4 key but don't know how and are worried about causing any issues, simply follow these inst…
Change Battery in Toyota RAV 4 Key
Change Battery in Toyota RAV 4 Key
Toyota Rav 4 (2013-2018 / Xa40, MK 4) Here’s how to change the battery inside the remote of a Toyota RAV 4. Take your remote key, remove the key from inside the plastics, then use a screw…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos