Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the tire pressure light on a Toyota Corolla?

Model: Toyota Corolla MK 5, E210 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tire pressure light on a Toyota Corolla, start by turning on the instrument panel without starting the engine. Use the buttons on the steering wheel to navigate through the onboard computer menu.

Press the "Menu" button and, using the selection commands, scroll through the various options until you find the section dedicated to tire pressure monitoring. Once you enter the correct menu, look for the option to reset the TPMS (tire pressure monitoring system) light.

At this point, press the confirmation button on the steering wheel and hold it down for a few seconds. The system will ask you to confirm the operation, and once confirmed, it will start the reset process.

The tire pressure light will turn off, indicating that the system has correctly recorded the current pressure. After completing the reset, verify that the light is actually deactivated by turning off and on the instrument panel.

If the light persists, check the tire pressure and repeat the procedure.


Posted on 25 April 2025 by ScegliAuto


Related tutorials

Toyota Corolla (2019-2026 / MK 5, E210) To reset the tire pressure warning light on a Toyota Corolla, turn on the instrument panel without starting the engine. Locate the tire pressure rese…
Toyota Corolla (2006-2013 / MK 3) Before you begin, sit in the driver's seat of your Toyota Corolla. Insert the key into the ignition and turn it to the first position to activate the…
Toyota Corolla (2019-2026 / MK 5, E210) The tire pressure warning light on the Toyota Corolla's instrument panel can be reset by first inflating the tires to the recommended pressure value,…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos