Do it yourself
Frequently asked questions about cars and motorcycles

How to deactivate the traction control of the Toyota Land Cruiser

Model: Toyota Land Cruiser J200, MK 11 - Years 2007-2021
Part: Checks and maintenance

Today's instructions will allow us to deactivate the traction control of the Toyota Land Cruiser. First, let's get into the vehicle and start the dashboard; then we press the traction control button located at the bottom on the central dashboard, behind the gear lever, as shown in the video. At this point, we will see that the traction control light is active, visible on the dashboard; to reactivate the traction control, simply press the button again, making sure the light has turned off on the dashboard!

Posted on 4 June 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

Toyota Land Cruiser (2007-2021 / J200, MK 11) Below are the instructions that will allow you to disable and activate the traction control on the Land Cruiser. Normally, traction control should ne…
Toyota Land Cruiser (2007-2021 / J200, MK 11) To reset the tyre pressure warning light on a Toyota Land Cruiser, first ensure that all tyres are at the correct inflation pressure, as indicated on…
Toyota Land Cruiser (1990-1997 / MK 7, J80) To access the cabin fuse box in your Toyota Land Cruiser J80, follow the steps outlined below. Before starting, ensure the vehicle is parked on a fla…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos