Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Land Cruiser
    4. : How do you activate the four-wheel drive on the Toyota Land Cruiser?

Toyota Land Cruiser - Video tutorial

Model: Toyota Land Cruiser MK 8, J90 - Years 1996-2002
Part: Checks and maintenance
Operation: How do you activate the four-wheel drive on the Toyota Land Cruiser?

In order to activate the four-wheel drive of the Toyota Land Cruiser, you need to use the lever located in the lower part of the cabin, behind the gear selector lever and below the steering column. Here, you will notice that the lever is in the H2 position, on the top left; to activate the four-wheel drive, you need to move the lever to the H4 position, pulling it downwards to the left. Once this additional lever is in the H4 position, the four-wheel drive will be activated, and you can switch back to two-wheel drive by repositioning the lever to the H2 position.


Posted on 11 September 2023 by ScegliAuto

    Frequently Asked Questions

    • Land Cruiser 2007-2021 - What are the warning lights on Toyota Land Cruiser? Read Answer
    • Land Cruiser 2002-2009 - What are the Toyota Land Cruiser dashboard warning lights? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos