Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the traction control button of the 2016 Toyota Corolla

Model: Toyota Corolla E160, E170, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Checks and maintenance

See other generations:
Video tutorial

Today we will explain how to replace the traction control button on a 2016 Toyota Corolla vehicle. We remove the lower cover of the gear shift boot and the bottom part of the central dashboard.

We disconnect the switch connector to remove its base, pushing outward with the help of a flathead screwdriver. We insert the new switch into the plastic and connect it to the corrector.

After inserting the switch inside, the lower dashboard is mounted, we turn on the vehicle to test the operation of the button to deactivate or activate the traction control.


Posted on 21 June 2025 by ScegliAuto


Related tutorials

How to Disable the Traction Control on the Toyota Corolla
How to Disable the Traction Control on the Toyota Corolla
Toyota Corolla (2013-2019 / E160, E170, MK 4) Today's main steps will show you how to disable the traction control on the Toyota Corolla; however, it is advisable not to disable the traction cont…
How to Disable Traction Control on the Toyota Corolla
How to Disable Traction Control on the Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) The instructions in this guide will allow you to activate and deactivate the traction control on the Toyota Corolla. The traction control is always a…
How to Disable Traction Control on a Toyota Corolla?
How to Disable Traction Control on a Toyota Corolla?
Toyota Corolla (2013-2019 / E160, E170, MK 4) To disable traction control on a Toyota Corolla, insert the ignition key into the ignition switch so that the instrument panel is lit up: once the pa…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos