Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the tire pressure warning light on the Toyota Auris?

Model: Toyota Auris E180 - Years 2012-2018
Part:

To reset the tire pressure warning light of the Toyota Auris, you need to inflate the tires until they reach the recommended pressure value: this value is indicated on the sticker that is attached to the driver's side door pillar. Once the inflation is done, you can go inside the cabin and turn on the instrument panel: at this point, you can open the glove compartment on the front passenger side. Here you will find the SET button that allows you to reset the warning light and you will need to hold it down for a few seconds to do so.

Posted on 25 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Toyota Auris (2012-2018 / E180) To reset the tyre pressure warning light on the Toyota Auris, turn on the instrument panel after all tyres have been inflated to the correct pressure…
Toyota Auris (2012-2018 / E180) To reset the tyre pressure warning light on the Toyota Auris, turn the ignition on without starting the engine. Next, open the glove compartment loca…
Toyota Auris (2012-2018 / E180) This guide explains how to reset the tyre pressure monitoring system (TPMS) warning light on a Toyota Auris. Before performing the reset, ensure all …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos