Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight and rear bulbs of the Toyota Aygo

Model: Toyota Aygo MK 1, Ab10 - Years 2005-2014
Part: Tail light

These simple steps will allow us to disassemble and replace the rear taillight and its bulbs of the Toyota Aygo. First, we open the rear hatch of the trunk and start removing the side plastic cover, unscrewing the screw we find at the bottom, thus accessing the rear part of the taillight; then we unscrew the fixing nut of the rear taillight, disconnecting the electrical connector of the bulbs to remove it, as shown in the video. At this point, if necessary, we replace the faulty bulbs with new ones, replacing the entire taillight; we connect it and reassemble everything!

Posted on 5 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Headlight of a Toyota Aygo
How to Remove the Front Headlight of a Toyota Aygo
Toyota Aygo (2005-2014 / MK 1, Ab10) Before you start, open the bonnet of your Toyota Aygo. Begin by removing the front bumper by unscrewing the relevant screws and bolts, then unclip th…
How do you remove the front headlight of the Toyota Aygo?
How do you remove the front headlight of the Toyota Aygo?
Toyota Aygo (2005-2014 / MK 1, Ab10) To be able to remove the front headlight of the Toyota Aygo, you need to open the hood so you can access the screws that secure the headlight to its …
Where are the fuses located in the Toyota Aygo?
Where are the fuses located in the Toyota Aygo?
Toyota Aygo (2005-2014 / MK 1, Ab10) The fuse boxes of the Toyota Aygo are responsible for containing the fuses that regulate the operation of the devices installed on the car: in this t…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos