Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Toyota Aygo key

Model: Toyota Aygo Ab10, MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Key

See other generations:
Video tutorial

In this video, we see how to change the battery of the key remote for the Toyota Aygo: we need to remove the small screw located on the side of the remote where the Toyota logo is located. We will need a small screwdriver for this, and in this way we can separate the two halves of the remote's body so that we can insert the tip of the screwdriver, opening it. This way we expose the clip that holds the battery, which we will push out of its housing by pushing with the screwdriver.

It is a common CR2016 battery, which we can easily get at any supermarket or electronics store. Replace it paying attention to the polarity, and then close the remote with its screw.


Posted on 11 August 2025 by ScegliAuto


Related tutorials

How to replace the battery of the Toyota Aygo key
How to replace the battery of the Toyota Aygo key
Toyota Aygo (2005-2014 / Ab10, MK 1) .. In this article, we will show you how to replace the battery of the Toyota Aygo key. For this operation, you will need a flathead screwdriver.. …
How to change the battery of a Toyota Aygo X key
How to change the battery of a Toyota Aygo X key
Toyota Aygo (2021-2026 / MK 3, Aygo X) In this very useful tutorial, we can see how to change the battery of a Toyota Aygo X key, a procedure also valid for other Toyota vehicles of the sa…
Where is the fuse box of the Toyota Aygo located?
Where is the fuse box of the Toyota Aygo located?
Toyota Aygo (2005-2014 / Ab10, MK 1) To locate the fuse box inside your first series Toyota Aygo, you need to read the following guide and then follow the various steps described. First,…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos