Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the rear light cluster on a 2015 Toyota Highlander?

Model: Toyota Highlander Xu50 - Years 2014-2019
Part: Tail light

It is not a complicated operation. Open the trunk and remove the inner panel next to the light. You will find screws or fastening clips: unscrew them with a crosshead screwdriver. Gently pull the headlight assembly towards you; you may need to apply slight pressure as it is locked with clips. Disconnect the electrical connector and, if necessary, transfer the bulbs to the new headlight. Connect everything, reassemble the headlight by pushing it into the clips and screwing the screws. Before closing the panel, check that the lights work. If the operation seems too difficult and you do not feel comfortable, contact an expert workshop.

Posted on 24 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear light on the Toyota Highlander?
How to remove the rear light on the Toyota Highlander?
Toyota Highlander (2014-2019 / Xu50) In this video, you can see how to remove the rear light of the Toyota Highlander, an operation to perform if you need to replace a bulb or the light …
How to Replace the Rear Light of the Toyota Highlander (2011)
How to Replace the Rear Light of the Toyota Highlander (2011)
Toyota Highlander (2008-2013 / Xu40) In this video, you will see the procedure for removing and replacing the rear light of the 2011 Toyota Highlander. First, open the boot and start by …
How to Disable the Traction Control on the Toyota Highlander?
How to Disable the Traction Control on the Toyota Highlander?
Toyota Highlander (2008-2013 / Xu40) To disable the traction control on the Toyota Highlander, turn the ignition key to power up the instrument cluster. Once the cluster is on, locate th…

Other guides you may be interested in

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos