Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear lights on the Toyota Highlander?

Model: Toyota Highlander Xu20 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Tail light

See other generations:
Video tutorial

Replacing the rear lights on the Toyota Highlander, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure that the key is not inserted to operate safely.

Start by opening the boot lid, then unclip the small panel located at the back of the light in question and disconnect the power connector. Next, loosen the two fixing nuts with a 10mm socket, grasp the light, and pull it away from the bodywork.

At this point, you can transfer the bulbs to the replacement and install it by following the reverse procedure.


Updated on 10 August 2026 by ScegliAuto


Related tutorials

Where are the Fuses in the Toyota Highlander?
Where are the Fuses in the Toyota Highlander?
Toyota Highlander (2008-2013 / Xu40) The fuses in the Toyota Highlander are divided within the appropriate fuse boxes located inside the vehicle: this model has two. The first is found i…
How to Replace the Rear Lights on a Toyota Highlander?
How to Replace the Rear Lights on a Toyota Highlander?
Toyota Highlander (2014-2019 / Xu50) In this tutorial, you will learn how to replace the rear lights on a Toyota Highlander, a very simple and quick operation. First, ensure that the key…
How to Remove the Fuel Pump from a Toyota Highlander
How to Remove the Fuel Pump from a Toyota Highlander
Toyota Highlander (2001-2007 / Xu20) Today, we will go through the steps to remove and replace the fuel pump on a Toyota Highlander. First, open the rear doors and start by removing the …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos