Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Lights on a Toyota Highlander?

Model: Toyota Highlander Xu50 - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light

See other generations:
Video tutorial

In this tutorial, you will learn how to replace the rear lights on a Toyota Highlander, a very simple and quick operation. First, ensure that the key is not in the ignition, then open the boot and, by unscrewing the relevant fixing bolt, detach the panel located on the inner side of the light in question from the bodywork.

Next, unscrew the two indicated bolts using a 10 mm socket spanner, grasp the light, and remove it from the housing. At this point, simply disconnect the power connector and fit the replacement by following the reverse procedure.


Updated on 15 October 2026 by ScegliAuto


Related tutorials

Where are the Fuses in the Toyota Highlander?
Where are the Fuses in the Toyota Highlander?
Toyota Highlander (2008-2013 / Xu40) The fuses in the Toyota Highlander are divided within the appropriate fuse boxes located inside the vehicle: this model has two. The first is found i…
How to replace the rear lights on the Toyota Highlander?
How to replace the rear lights on the Toyota Highlander?
Toyota Highlander (2001-2007 / Xu20) Replacing the rear lights on the Toyota Highlander, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure …
How to replace the fog lights in the Toyota Highlander?
How to replace the fog lights in the Toyota Highlander?
Toyota Highlander (2014-2019 / Xu50) In this tutorial we can see how to replace the fog lights in the Toyota Highlander, an extremely simple and quick operation. First of all, make sure …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos